หจก.จันทร์เมฆา เซอร์วิส

Getting to know the job sandblasted.   

​

What a blast ?

           The blast was the polished surface with sand blasting. The pressure from the pump, which is driven with the sand to the surface of the workpiece. The wind is very strong result in skin quickly. And reach every corner Of course, having a good scrubbing by hand. We can choose to work surface, rough or detailed as desired by selecting the size of a grain of sand used in the operation. (Blast not to spray sand to stick to the surface, but the surface to remove sand. And sandblasted to a matte surface only. Can not be polished to a shiny transparent).



What is the purpose of the blast.



      - Cleanliness, cleanliness is to eliminate the other coating. Or on the surface The steel body with color by polishing all metals. To cleanse the dirty old rusted like new, polished mold surface to a coarse or subtle as you want to, polishing to remove scratches cats - removing Oxford - Roy grinding, polishing to prepare the surface before coating or painting so. adhesion even better



     - Roughness Roughness is to create roughness. On the steel to paint adhesion to steel. (There are also other minor again. In order to reduce the salinity That this is not mentioned).

Equipment (Equipment)

1. Air Blast (Allah Blasting System).

2. Sand blasting (Blasting Abrasives).

3. Paint System AIRLESS SPRAY.

4. Chugoku color or paint their customer support.

5. Personal Security Device (Personal Protective Equipment-PPE).

6. The colors used in the painting (The colors used for spraying) Chugoku own color or customer support.

Steps to sand blasting work.

              From the first of the main factors is that 1) we use sand blasting. We use sand from a good source and reliability. Sand quality 2. The second thing is that the air blast (Blasting System), we used a large wind power will be used to create pressure in the spraying. The more pressure it will put on a polished metal surface or piece of dirt quickly and thoroughly. In the sandblasting process is very important. The need to check the surface of the painting. After sandblasted finish to distinguish your job. To clean the surface of the workpiece. But we have noticed in the work that has been sandblasted and then do it. It is evident that the surface of the dough pieces are small. Meat on general This is caused by The sand that we put on the spit each source varies. The hardness of different. We have screened the sand coming from a good source.

After sandblasted finish We clean the sand next to a piece of dust around the air and the next step is to make a spray primer before a second step, called the painting sync. We use quality color from Chugoku, and the final step is to paint system (AIRLESS SPRAY) increases the adhesion of the paint job. Reduce the amount of paint needed Each time customers save costs and. By AIRLESS SPRAY paint thickness is uniform in color and cling tightly over the specimen.

The estimated cost of each piece.

             For each piece will have a different away. Depending on the cleanliness of the work and the number of square meters of the job that the price Rate depending on the number of square meters of the total number much higher. The price per square meter will save the price only. You can call for information or consult with our services before you (at no cost whatsoever) if the client wants to blast noise to send the file to us, sandblasted or sand shot via Email: janmekha1 @. gmail.com or click contact us to submit a detailed inquiry or offline before it.

The main factor in the operation

1. Material sand which is primarily used in the operation.

2. The colors used in the painting (The colors used for spraying) Chugoku or customers own paint supply.

3. Staff, which we call the team. If the team is not good enough and would not come out good every day. (Thanks to a great team here).

4. Supplier Relationship with our supplier for over 20 years.

5. Customer our loyal customers for a long time.

The equipment used in the operation.

             The equipment used to perform work that is most important for us. Technicians set sandblasted or safety of our helmet APOLLO main reason I chose this was because the helmet is a helmet that has great potential. In terms of breathing into the cap through the air filter and capture sound. Ventilated To eliminate water vapor condensed on the glass smooth. We have also installed air conditioning to cool air tube to cool. And the Climate control tube into higher and lower temperature. We care about the health of everyone in the team is like a family. Even with an investment rather random, but we will not fail to find an exposition of others to do it.